Assembly & set up.
Base mobility wheel
fixing holes
Fixing screws
Fixed mobility
kit wheel
Leveling foot
Fitting the leveling feet and the mobility kit.
1.
Raise the machine off the ground on to
wooden blocks.
2
. Fit a leveling bolt to the 2 corners of the
machine.
3.
Fit the two fixed mobility kit wheels to the
opposite corners.
4.
Lower the machine to the ground and place a
spirit level on the table of the machine.
4.
Adjust the leveling feet until the spirit
level shows that the table is level in both
directions and that the machine will not
rock.
Note.
If you move the machine you may
find that the leveling bolts will need to be
readjusted.
5.
Fit the external mobility kit wheel to
the base of the machine with the three
fixing bolts.
External mobility kit wheel
assembly fixing bolts
14
