Noise emission
Notes concerning noise emission
Given that there exists a relationship between noise level and exposure times, it
is not precise enough to determine the need for supplementary precautions. The
factors affecting the true level of exposure to operators are clearly the amount
of time exposed, the characteristics of working environment other sources of
dust and noise etc. For example, adjacent machines in other words the level of
ambient noise. It is possible that exposure level limits will vary from country to
country.
Specification sheet
Machine
16 inch
20 inch
Motor
3 hp TFEC
5 hp TFEC
Planer table size
16 inch X 20 inch
25 inch X 20 inch
Planer table with
extensions
16 inches X 42 inches
55 inches X 20 inches
Cutter head
6 row spiral
6 row spiral
Dust chute diameter
4 inches
4 inches
Max planer width
16 inches
20 inches
Max planning height
8 inches
8 inches
Cutter speed
4800 rpm
4800 rpm
Volts
220V 1 Phase
220V 1 Phase
Weight
560 lb
830 lb
Receiving your machine
Note.
It is probable that your machine will be delivered by a third party. Before
you unpack your new machine you will need to first inspect the packing,
invoice and shipping documents supplied by the driver.
Insure that there is no visible damage to the packing or the machine. You need
to do this prior to the driver leaving. All damage must be noted on the delivery
documents and signed by you and the delivery driver. You must then contact
the seller [Laguna Tools] within 24 hours.
6
