Laguna Tools MCNC Creator Pro I-24P, Руководство пользователя

Страница: 9 / 66

MCNC Creator Pro I-24P
9
1.3.2 Health and Safety
1. Always wear approved personal health and safety equipment as indicated for the materials
and type of operations that will be performed. These should include a dust mask, hearing
protection, safety clothing, and safety glasses/face shield. Wear ear protectors (plugs or
muffs) even during short periods of operation.
2. Before operating this machine: remove all hand, wrist, or neck jewelry and push sleeves up
over the elbows. Do not wear loose clothing which may become caught in the machine and
confine long hair. Non-slip footwear or anti-skid floor strips are recommended.
3. Use a dust mask or other safeguards to avoid inhaling dust generated from wood products.
Install dust collection equipment consistent with shop ventilation practices and budget.
Remove dust and debris from the floor frequently to prevent slipping. Drilling, sawing,
sanding, or machining wood products generates wood dust and other substances known to
the State of California to cause cancer. Wood products also emit chemicals known to the
State of California to cause birth defects or other reproductive harm (California Health and
Safety Code Section 56).
4. In addition to other health hazards, dust from wood and other materials is flammable. Do not
operate welding, wood burning, smelting, soldering, or other high-heat tools on the Creator
CNC machine or vicinity.
5. Do not operate this machine while tired or under the influence of drugs, alcohol, or any
medications.
1.3.3 Electrical
1. Verify the switch is in the OFF position before connecting the machine to the power supply.
2. Verify the machine is properly grounded and the circuit is protected with a fuse or circuit
breaker in accordance with local codes. Install a separate circuit if necessary to limit power
loss when multiple machines in the shop are operating simultaneously. If necessary, place a
cover on the outlet to prevent accidental disconnection.
3. Verify all machine adjustments or maintenance with the machine unplugged from the power
source.
4. Follow effective lockout procedures to reduce the risk from high voltage wires and
components and prevent accidental operation.
5. Do not operate in a damp or wet location or expose to rain, fog, or snow.