Laguna Tools MCNC Creator Pro I-24P, Руководство пользователя

Страница: 55 / 66

MCNC Creator Pro I-24P
55
Symptom Possible Cause Correction
Router head does not stop after
contacting tool touch-off puck.
Poor connection of between the
touch-off device and gantry
connections.
Inspect connections inside
touch-off device and gantry.
Poor connection of spindle with
“GND” terminal on interface
board.
Restore proper connection.
Machine will not move after
controller receives commands.
One axis not moving – may be
poor connection.
Connect a different axis
connection to this terminal to
test. If it works, the motor driver
is okay. Check connections
along corresponding drive and
motor.
All axes not moving. First, check 50-pin cable
connection to interface board.
Then check the power supply of
motor drivers. Last check
mechanical elements of axis
system.
Machine moves to new position
satisfactorily but does not return
correctly to original position.
Mechanical elements, such as
ballscrews, are loose or
misadjusted.
Inspect and correct as needed.
The Stepper motors have
slipped and lost position.
Check speeds and proper
lubrication on all ballscrews and
prismatic guides.
Abnormal operation when
processing.
Program/drawing file is faulty. Review program and reload to
system. Verify the file is
completely saved before
removing USB from PC.
After controller powers on, one
or more axes move only one
direction.
Improper connection between
DSP board and motor drive.
Inspect connections.