Laguna Tools MCNC Creator Pro I-24P, Руководство пользователя

Страница: 46 / 66

MCNC Creator Pro I-24P
46
To use the Find Break No. option, select Find Break No:
1. Select the file (either from U-Disk or internal memory).
2. Prompt will give the following instructions (use X+/- buttons to scroll).
a. Press OK to resume from existing break.
b. Press any other key to display the break line number only.
3. Approve speeds to begin machining if applicable.
6.11 Scale Work
This feature will allow for the increase or decrease in scale existing toolpaths. Origin and all other
settings will remain the same.
Be sure that there is enough room within the machine limits to support the increase in scale.
To use the Scale Work option, select Scale Work:
1. Select the desired file (either from U-Disk or Internal Memory).
2. Set scale for X, Y, and Z-Axes.
3. Approve speeds to begin operation.
6.12 Step Work
This function will allow the toolpath to be operated one step (one line of g-code) at a time.
To enter Step Mode, select Stop Mode:
1. Select the desired file (either from U-Disk or Internal Memory).
2. Prompt will give the following instructions (use X+/- buttons to scroll).
a. Press RUN to continue working (normal operation).
b. Press OK to perform steps. Each press of OK will perform one step.