VitalsBridge Directions for Use
14
rev. A.5
i.
Determine which connectors your cable will need to connect to the VitalsBridge NBP port. If the
NBP tubing coming from your monitor has 2 connectors, a 2-tube to 1-tube adapter fitting has
been provided.
ii.
Follow the instructions with the images below.
c.
Connect the appropriate adapters and connectors to the NBP cable from the patient monitor if
necessary.
3.
Connect the NBP cable to the labeled NBP port on the VitalsBridge.
4.
Run a blood pressure cycle on the patient monitor. If everything has been connected correctly, a reading should
appear on the monitor once the cycle is complete.
Select the appropriate tube and luer fittings
Affix the tube and luer fittings to each other to provide an
ending that can be attached to the monitor NBP tubing
Содержание VitalsBridge 100
Страница 1: ......
