laerdal VitalsBridge 100, Инструкция по применению

Страница: 10 / 45

VitalsBridge Directions for Use
9
rev. A.5
Power on the VitalsBridge
To power the VitalsBridge via wall power, simply connect the external power adapter and plug into any standard wall
outlet.
Warning : Use only the included 9V power supply. Prior VitalsBridge models used a different voltage for their
power supply. Using an incorrect power supply may damage the VitalsBridge and void the warranty.
The VitalsBridge is turned on by simply pressing the power button in the lower left corner of the top surface of the
device (hold for 1 second). Once powered on, the VitalsBridge takes approximately 1 minute to initialize. The LED below
the battery will flash when the VitalsBridge is initializing and become solid once initialized.
Check the status indicator lights on top of the VitalsBridge instrumentation to determine power and connectivity.