laerdal VitalsBridge 100, Инструкция по применению

Страница: 22 / 45

VitalsBridge Directions for Use
21
rev. A.5
Install and Run the VitalsBridge Connector Software
VitalsBridge Connector (Windows PC)
PC Requirements:
•
Windows 8, 8.1, and 10 operating system (see www.vitalsbridge.com/downloads/ )
•
Ethernet (LAN), wireless network (WLAN), Bluetooth or USB/serial (RS-232) communication capability
Installation
Software Download Link:
•
www.vitalsbridge.com/downloads/
Download the appropriate VitalsBridge Connector installation software from vitalsbridge.com/downloads/ . If necessary,
copy the software to the computer on which it will be installed.
Note: Choose the appropriate VitalsBridge installation software carefully. There may be specific installation software
that is compatible with a particular version of a patient simulator (e.g. a particular version of Laerdal’s LLEAP) software.
Note : If it is intended for the VitalsBridge to be used in conjunction with Laerdal LLEAP patient simulator software,
download the VitalsBridge connector software to the computer w here Laerdal’s LLEAP is installed. Otherwise simply
download the connector software to the computer the VitalsBridge will be controlled from.
Once downloaded, navigate to the installation software file and open it. Follow the on-screen installation instructions.
Upon successful installation, a VitalsBridge icon will be created on the PC's desktop.