VitalsBridge Directions for Use
36
rev. A.5
Other Configuration Settings and Features
Setting the VitalsBridge Name
1.
Navigate to the
“
Configuration
”
tab of the VitalsBridge.
2.
Check the
“
Update
”
checkbox adjacent to the VitalsBridge Name.
3.
Enter the new name of the VitalsBridge and press UPDATE
4.
The VitalsBridge will be updated with the new name.
Pulmonary Capillary Wedge Pressure Simulation (VB300 only)
Simulation of wedging a small pulmonary artery by inflating a balloon to measure the pulmonary capillary wedge
pressure (PCWP) is accomplished by checking the PCWP checkbox in the Manual tab of the VitalsBridge connector. This
will send a PCWP waveform from the VitalsBridge to the vital signs monitor using the PAP connection. Adjust the value
of the PCWP value by using the + - on the VitalsBridge. If a patient simulator is generating the PCWP waveform, click the
checkbox on the Simulator tab to change the waveform from PAP.Use the VitalsBridge with a Patient Simulator
The VitalsBridge Connector Software offers direct integration with Laerdal Patient Simulators that are running LLEAP.
Other patient simulator brands and models may also be compatible with the VitalsBridge. The VitalsBridge can also be
run with low-fidelity manikins and standardized patients.
Standardized Patients and Low-Fidelity Patient Simulators
Basic steps to run the VitalsBridge with a standardized patient or low-fidelity manikin:
1.
Power on the computer.
2.
Power on the VitalsBridge.
3.
Run the VitalsBridge Connector Software.
4.
Connect the VitalsBridge to the connector software.
Содержание VitalsBridge 100
Страница 1: ......
