© Advanced Labelling Limited July 2008
-
12
-
LabelStation Pro Series Set Up Manual July 2008
Fig. 11. External Roll Mount Label Installation 1
•
Feed the labels, printing side face up, through the paper guide and pass over the
platen.
•
Adjust the paper guides by removing them left or right to fit the paper width.
•
Close the printer top cover by lifting up the support and close the printer top slowly.
Fig. 12. External Roll Mount Label Installation 2
PLEASE NOTE WHEN YOU ARE USING HORTICULTURAL LABELS
MAKE SURE THE LABELS ARE INSTALLED IN THE PRINTER SO THE
LABELS ARE COMING OFF THE BASE OF THE ROLL NOT OFF THE TOP.
THIS IS THE OPPOSITE OF THE DIAGRAM ON THE BASE
External Roll
Holder
External Label
Feed Opening
Rear Paper
Guide
Front Paper
Guides
Platen
Top Cover
Support
