LabelStation Pro200 series, Руководство пользователя

Страница: 20 / 24

© Advanced Labelling Limited July 2008
- 20 -
LabelStation Pro Series Set Up Manual July 2008
3.3.1.4. The printer is out of labels or ribbon or the printer setting is not
correct
• Out of label or ribbon
o
Load a roll of label and follow the instructions in 2.3. Loading the Paper then
press the feed button to resume printing.
o
Load a roll of ribbon and follow the instructions in 2.2.Loading the Ribbon
then press the feed button to resume printing.
• Printer setting is not correct.
o
Initialize the printer by following the instructions in “Power on Utility”.
o
Label Setup is not correct.
3.3.2. Print Quality
3.3.2.1. Continuous feeding labels
• The printer setting may go wrong. Please do the Initialization and Gap/Black Mark
Calibration.
3.3.2.2. No print on the label
• Is the label or ribbon loaded correctly?
o
Follow the instructions in 2.3. Loading the Paper or 2.3. Loading the Ribbon.
•
Does the ribbon run out?
o
Follow the instructions in 2.2. Loading the Ribbon.
3.3.2.3. Poor print quality
•
Top cover is not closed properly. Close the top cover completely and make sure the
right side and left side levers are latched to top cover properly.
• Clean the thermal print head.
• Check the ribbon is fitted correctly.
• Adjust the print density setting.
•
Ribbon and paper media are not compatible.
If the printer still does not function after all suggested solutions have been invoked, please
contact Advanced Labelling Systems on 01202 683212.
Emailed requests for support should be directed to info@labelzone.co.uk
Our technical support is available to you during working hours, please call with any problems you
may have. Tech Support Line – 01202 683212