© Advanced Labelling Limited July 2008
-
13
-
LabelStation Pro Series Set Up Manual July 2008
2.3.2.
Loading Labels with the Cutter Unit Attached (Optional)
•
Insert the label spindle into your label roll (as section 2.3.)
•
Open the printer top.
•
Install the label roll on the paper roll mount.
•
Feed the labels, printing side face up, through the paper guide and pass over the
platen.
•
Lead the labels through the cutter paper opening.
•
Adjust the paper guides by moving left or right to fit the labels width.
Fig.13. Label installation in cutter mode
•
Close the top cover by lifting up the top cover support and close the top cover slowly
Fig.14. Complete label installation in cutter mode
Paper Guide
Cutter
Platen
Top Cover
Support
Top Cover
