LabelStation Pro200 series, Руководство пользователя

Страница: 2 / 24

© Advanced Labelling Limited July 2008
- 2 -
LabelStation Pro Series Set Up Manual July 2008
Contents
1. GETTING STARTED
1.1. Unpacking your LabelStation Pro Series
1.2. Equipment Checklist
1.3. Getting to Know your LabelStation Pro Series
1.3.1. LabelStation Pro Series Printer External View
•
Fig.1. Top Front View
1.3.2. LabelStation Pro Series Printer External Rear View
• Fig.2. External Rear View
1.3.3. LabelStation Pro Series Printer External Label Roll Mount
•
Fig.3. External Label Roll Mount
2. SETTING UP YOUR LABELSTATION PRO SERIES
2.1. LabelStation Pro Series to PC Connection
•
Fig.4. Attach power supply to printer
2.2. Loading the Print Ribbon
2.2.1. Installing the Print Ribbon into the LabelStation Pro Series printer
•
Fig.5. Ribbon Installation 1
• Fig.6. Ribbon Installation 2
2.3. Loading Label Stock
•
Fig.7. Label Roll Installation
• Fig.8. Pull the lever to open the cover
•
Fig.9. Correct Label Installation
2.3.1. Using the External Roll Holder
• Fig.10. Attaching the External Roll Holder
•
Fig.11. External Roll Mount Label Installation 1
•
Fig.12. External Roll Mount Label Installation 2
2.3.2. Loading Labels with the Cutter Unit Attached (optional)
• Fig.13. Label Installation in Cutter Mode
•
Fig.14. Complete Label Installation in Cutter Mode
2.3.3. Closing the Top Cover
2.3.3.1. To Open
•
Fig.15. Top Cover Support is fixed at Position 2
2.3.3.2. To Close
• Fig.16. Top Cover is fully open & ready to close
•
Fig.17. Use both hands to close the Top Cover
2.4. Printing from Windows Software
3. LABELSTATION PRO SERIES SPECIFICATIONS
3.1. Power On Utilities
3.1.1. Ribbon Sensor Calibration
3.1.2. Gap Sensor Calibration Utility
3.1.3. Self Test Printout
3.1.4. Dump Mode
3.1.5. Printer Initialisation
3.2. Maintenance
3.2.1. Cleaning