background image

5

After completing all the electrical connections to the electronic control unit of the automation (ETERNA/

NEXT), power the automatic door.

When  installed  for  the  first  time,  the  selector  shall  automatically 

switch to the language selection menu. 

Scroll the available languages using the A (down) or C (up) buttons 

until you find the desired one. Now press the SET button to confirm 

and exit this menu.

The language shall be saved and you shall no longer have to select 

it again. Should you later wish to change the language, access 

menu 5 from the technical area and repeat the operation. 

Once the language has been chosen the selector will automatically 

start detecting the doors existing on the serial communication line 

(up to 2); the data will be stored in the processor. During this step the 

“WAIT” message will be displayed on the alphanumeric character 

line. Wait for this step to be completed before you touch any button.

Warning!

The detection operation shall be automatically performed every time the door is powered, 

and shall take a few seconds.

If the operation has been successfully completed the selector will display on the alphanumeric character 

line the saved operating program for the door, along with its text, in the desired language.

The following paragraph provides a list of the available programs (you can also customise their visibility 

- see the SELECTOR OPTION chapter).

Should the “ NO COMM” message be displayed instead of one of the operating programs, the selector 

has detected no connected door. In this case check the connection and retry.

DAY-TO-DAY USE

The T-NFC model allows to select 6 different program types for day-to-day use:

AUTO:

   The door opens and closes automatically both ways with all sensors activated

EXIT:

  

The door only opens and closes automatically in the exit direction: the sensor connected to 

the External Radar input is temporarily disabled.

ENTER:

   The door only opens and closes automatically in the entry direction: the sensor connected 

to the Internal Radar input is temporarily disabled.

Содержание T-NFC

















Отзывы: