12
To change the value of the selected potentiometer press the B button (-) to decrease it or the D button
(+) to increase it.
The automation software updates the parameters when it reaches the opening or closing
limit switch; as a consequence, you need to wait for the door to open or close fully to actually
observe the effect of the edits made through the selector. The microprocessor managing
these edits features a buffer; this allows to simultaneously change multiple parameters
without the relevant update being lost.
After editing the desired parameters, press SET to exit the menu and return to the main page of the
technical area.
To exit the technical area and return to the main screen, press SET again.
3-SELECTOR OPTION
This menu allows to customise the T-NFC selector.
As mentioned in the “DAY-TO-DAY USE” paragraph, it allows to select 6 different operating programs,
to enable a reduced opening during winter and to activate a set of special functions through the C
button. In a simple installation, these choices are often unnecessary and could confuse the end user.
For this reason the undesired operating programs and the buttons associated with special functions
can be filtered out on the selector.
When the menu is accessed, the first customisable parameter is displayed:
The AUTO operating program
The current state of this parameter is displayed in the right section of the alphanumeric character line:
ON
= enabled
OFF
= disabled
To change the parameter state, press the B button to disable it (OFF) or the D button to enable it (ON).
To move to the next customisable parameter, press the A button; to return to the previous customisable
parameter, press the B button.
