10
Full setup (FULL):
Important!
The opening direction is self-learned, provided the leaf is closed when the setup is launched.
Remember to close the door before launching the setup.
The display shows a list of functions to be selected to operate the door.
Press the A button to move to the next function; press the C button to return to the previous one.
To change the selected function state, press the B button to disable it (OFF) or the D button to enable
it (ON).
Warning!
For information about the meaning of functions S1 to S14, please refer to the initial SETUP
paragraph of the automation Installation Manual.
Once the last function has been reached, the
message is displayed on
the alphanumeric character line.
Important!
The opening direction is self-learned, provided the leaf is closed when the setup is launched.
Remember to close the door before launching the setup.
Now press the A button to launch the Setup.
A beep shall signal that the setup has started.
The door shall run an opening cycle at reduced speed, then it shall emit a continuous beep for a few
seconds to signal that the setup is completed.
From now on the door shall be fully operational.
Stroke setup (PART):
Important!
The opening direction is self-learned, provided the leaf is closed when the setup is
launched. Remember to close the door before launching the setup.
A beep shall signal that the setup has started.
The door shall run an opening cycle at reduced speed, then it shall emit a continuous beep for a few
seconds to signal that the setup is completed.
From now on the door shall be fully operational.
