Labconco 44000 Series, Руководство пользователя

Страница: 66 / 107

Chapter 2: Prerequisites
Chapter 6: Modifying Your Washer
P#o%&ct Se#+ice -./00.122.341/ 62
The 14-place Pipet Insert, shown in Figure 6-3,
accommodates 1 ml to 50 ml pipets. Two of these inserts
may be installed, if desired. Refer to Figure 6-3 and
follow the instructions below to install a 14-place Pipet
Insert.
To install a 14-place Pipet Insert:
1. Use a screwdriver to remove the three spindles on
either the right side or left side of the spindle rack.
Remove others if necessary.
2. Replace the front and back spindles with the two short
spindles that you received with the Pipet Insert.
3. Replace all other spindles with one of the plastic plugs
that you received with your washer.
4. With the support facing the center of the spindle rack,
slide the Pipet Insert over the spindles until it
completely seats.
5. Pipets can be pushed into the 14 receptacles and rest
on the support.
Figure 6-3
14-place
Pipet Insert
Short spindles
supplied with
Pipet Insert.