Labconco 44000 Series, Руководство пользователя

Страница: 45 / 107

Chapter 4: Using Your Washer
41 P#o%&ct Se#+ice -./00.122.341/
The FlaskScrubber Rack
The FlaskScrubber 5lassware Washer is equipped with a
spindle rack and four glassware holders. The
FlaskScrubber spindle rack is designed for narrow-necked
glassware such as volumetric flasks, Erlenmeyer flasks,
graduated cylinders, hjeldahl flasks, test tubes, and
digestion tubes.
Two sizes of spindles are provided with the washer:
twenty-four 1b4
" OD and ten 1b8 " OD spindles. The
glassware holders that are included with your 5lassware
Washer allow for the positioning and washing of beakers
and other wide-mouth glassware. The optional Multi-Pin
Insert, part number 44049-01, may be positioned over
spindles. Figure 6-9 illustrates the placement of the Multi-
Pin Insert. The spindles can be removed with a screw
driver and replaced with the plugs included with the
washer.
Optional top racks are available for the FlaskScrubber to
expand the washerps capacity to accommodate many types
of glassware. An Upper Spindle Rack is available with 24
spindles and an upper rack is available with 24 pins.
To remove a spindle,
insert a screwdriver
into the slot on the top
of the spindle and turn
counter-clockwise.
After removing the
spindle, thread a nylon
plug into the resulting
hole.
Figure 4-3