Labconco 44000 Series, Руководство пользователя

Страница: 51 / 107

Chapter 4: Using Your Washer
47 P#o%&ct Se#+ice -./00.122.341/
Selecting an Operating Cycle
The microprocessor control on your 5lassware Washer
allows you to select one of four factory preset wash cycles,
to custom program two additional cycles, or to run a rinse-
only cycle. The control panel is shown in Figure 4-7.
Programming and Starting a
Wash Cycle
Refer to
Appendix C: Glassware Washer Specifications for
complete details on the various factory-set programs and
the options available for customizing cycles. After you
have decided which washer cycle you need to use, follow
the instructions below tostart your washer.
Figure 4-7
Press to
activate
the
steam
function.
Press to
display
details
about the
selected
wash cycle.
Press to
start wash
cycle.
Press
to
select
the
wash
cycle.
Press to
rinse with
pure water.
Press to
change
the
length of
Wash 2
cycle.
Press to
change
the
number
of
rinses.
Press to
change
the
drying
time.