Labconco 44000 Series, Руководство пользователя

Страница: 38 / 107

Chapter 2: Prerequisites
Chapter 3: Getting Started
P#o%&ct Se#+ice -./00.122.341/ 34
BEFORE OPERATIN5 THE WASHER
WITH THE PURIFIED WATER OPTION
SELECTED, CHECh THE PURIFIED
WATER SUPPLY FOR AMPLE
QUANTITY.
To run the diagnostics test :
1. Locate the control panel on the front of your washer.
2. Press and hold the bottom right button and close the
handle of your washer by sliding the door latch knob
to the right.
3. The display window should read: PRESS SELECT:
TST.
4. Press the Select Program button.
5. The display window should read: FILL VIA TAP.
Tap water should be heard entering the washer. Allow
tap water to enter for approximately one minute.
6. Press the Select Program button.
7. The display window should read: DE-ION PUMP
ONLY.
8. Press the Select Program button.
9. The display window should read: FILL VIA DE-ION.
De-ionized PDIQ water enters the washer and the DI
pump should be heard. After approximately 4 minutes
the float switch should turn off the flow of DI water.
10. Press the Select Program button.
11. The display window should read: PUMP - ON:
WASH. The wash cycle should activate.
12. Press the Select Program button.
13. The display window should read: PAUSE. All washer
functions should be off.
14. Press the Select Program button.
15. The display window should read: PUMP - ON:
DRAIN. The water drains from the washer. Allow all
the water in the washer to drain. You can tell when
this occurs when the sound of the pump changes.
16. Press the Select Program button.
17. The display window should read: DETER5ENT CUP.
Within a minute, you should hear the detergent cup lid
open.
☞