Labconco 44000 Series, Руководство пользователя

Страница: 53 / 107

Chapter 4: Using Your Washer
49 P#o%&ct Se#+ice -./00.122.341/
If steam operation is needed, press the corresponding
button. In this mode, the 5lassware Washer will refill
with fresh water after the completion of Wash 1. Both
the sump and steam heaters will operate for 10 minutes
to produce hot vapor to penetrate and soften dried
residue, allowing detergent and hot water to work
effectively.
5. On Mobile washers, turn the hot water on.
6. Press the Start button to begin the wash cycle.
7. Press the Shift Program button if you want the display
to indicate details about what mode the washer is in
and the time remaining.
Interrupting a Wash Cycle
To temporarily pause a wash cycle, simply unlatch the
washer door. After the door is unlatched, wait 4 to 5
seconds before opening the door to prevent water from
splashing out of the washer.
To resume the wash cycle, close and re-latch the washer
door. The washer will pause to equalize temperatures and
then the cycle will resume at the point it was interrupted.
The wash cycle can be terminated at any time by pressing
the StartbCancel button.