p. 71
of the lesson on the screen. Scroll arrow buttons are provided to allow you to manually scroll
through the lesson plan. Operation of the lesson plan is the same as in Profile view.
Operating a Lesson Plan
Buttons are provided in the Lesson Toolbar to allow you to control the lesson:
Play (or Stop). Selecting Play starts the lesson plan. Selecting Stop stops the
lesson plan.
Enter Item, which allows you to activate manual events. Automatic events also
respond to Enter Item and act as if the associated preset conditions have been
satisfied.
Mode, which allows you to switch between Manual and Automatic modes. In
Manual mode, automatic events must be manually selected before the event will
start to monitor the preset conditions.
NOTE:
A lesson plan can be 'locked' in either mode from the Lesson Plan Editor.
View, which switches between Profile and List view.
Back and Forward arrow buttons, which allow you to scroll through the lesson plan.
The lesson stops automatically when the last event has finished executing.
5.6 Maintenance Index
This page is selectable from the
Maintenance pages which are provided for use by the technician to set up the IOS and to run
acceptance tests on the simulator.
Use of the pages is password-protected.
5.7 Malfunctions / Circuit Breakers
, the Malfunctions/Circuit Breakers tab suite
comprises 2 tabs providing access to the following pages:
page which displays a list of available malfunctions.
page which allows you to trip the circuit breakers associated
with the aircraft equipment specified on the button.