Getting Ready
54
54
⑱
NFC (FeliCa compatible) antenna
*1
Hold over a reader/writer when using Osaifu-
Keitai
®
.
Send or receive data via IC transmission.
⑲ Wireless charging area
*1
For wireless charging, place the "R" letter of
"TORQUE" logo on the
q
mark on a separately-
sold wireless charging pad.
⑳ Back cover
*2
Lock knob
Built-in WiMAX 2+ antenna
※1
Built-in main antenna
※1
Out camera (lens)
Shooting/simple light
Wide camera (lens)
au Nano IC Card 04 slot
Wireless charging antenna connection terminal
Battery pack
Under the battery back, au Nano IC Card 04 slot
and microSD memory card slot are found.
microSD memory card slot
Battery lock
Wireless charging antenna/charging connection
area
*1 Do not cover antennas with your hand or put
stickers etc. Doing so may affect calling/
communication quality or wireless charging.
*2 Avoid adhering stickers, etc. on the back cover
where the wireless charging antenna/charging
connection area are located. Doing so may affect
wireless charging.
◎ Do not put stickers, etc. on the proximity sensor/
light sensor.
◎ Product is equipped with an atmospheric pressure
sensor. You can display barometric pressure and
elevation when using a barometric display app,
however, values are not absolute due to a number
of variables, and are approximate only.
◎ Do not remove the film sheet from the
mouthpiece (microphone)/atmospheric pressure
sensor/speaker.
◎ A front screen is adhered to the product to
protect the display (touch panel). If the screen
becomes damaged or worn, it can be replaced
with the front screen (KYV46KGA) (sold
separately).