Job
password to the custom box list in the driver. With user permissions, the print
job is canceled. You will be prompted to contact an administrator to establish
printing permissions.
Quick Copy
Quick copy
is a
Job storage (e-MPS)
option that prints all copies of a print job
and stores the job temporarily on the hard disk for reprinting later. This feature is
available when a hard disk is installed and selected in
Device Settings
.
Quick copy
is useful for printing the job again later in the day when you need
additional copies at short notice. You can set the number of additional copies,
and print the job from the printing system’s operation panel without sending the
job again from the computer.
The number of
Quick copy
or
Proof and hold
jobs that can be stored is set at
the printing system’s operation panel, to a maximum of 50 jobs. When the
designated number of jobs is reached, older jobs are replaced by new jobs. All
Quick copy
jobs are stored on the hard disk after printing but are deleted when
the printing system is turned off. You can manually delete a job at the operation
panel.
Warning:
A print job can replace a job on the hard disk having the same user
name and job name. To prevent this, select
Use job name + date and time
under
Overwrite job name
.
Printing a Quick Copy Job
With a hard disk installed,
Quick copy
lets you print a document and save it in
the printing system until the job is manually deleted or the printing system is
turned off.
1
In the
Job
tab, select
Job storage (e-MPS)
.
2
Select
Quick copy
.
3
Click
OK
in all dialog boxes.
Proof and Hold
Proof and hold
is a
Job storage (e-MPS)
option that prints one copy of a print
job so that you can proof it before printing the remaining copies. This feature is
available when a hard disk is installed in the printing system and selected in
Device Settings
.
After the proof copy is printed and checked, remaining copies can be printed
from the printing system’s operation panel without sending the job again from
the computer. If desired, you can change the number of copies printed.
Note: Proof and hold
is not available for some applications such as Microsoft
Excel.
The number of
Proof and hold
or
Quick copy
jobs that can be stored is set at
the printing system’s operation panel, to a maximum of 50 jobs. When the
designated number of jobs is reached, older jobs are replaced by new jobs. All
Proof and hold
jobs are stored on the hard disk after printing but are deleted
when the printing system is turned off. You can manually delete a job at the
operation panel.
KX DRIVER
9-3
