manualshive.com logo in svg

Kyocera KM-2550, Руководство по обслуживанию

Поделиться
Скачать
Kyocera KM-2550 Скачать руководство пользователя страница 72

2FT

1-4-5

(3) Contents of the maintenance mode items

Maintenance

item No.

Description

U000

Outputting an own-status report
Description

Outputs lists of the current settings of the maintenance items, and paper jam and service call occurrences.

Purpose

To check the current setting of the maintenance items, or paper jam or service call occurrences. Before initial-
izing or replacing the backup RAM, output a list of the current settings of the maintenance items to reenter the
settings after initialization or replacement.

Method

1. Press the start key. The screen for selecting an item is displayed.
2. Select the item to be output using the up/down cursor keys. The selected item is displayed in reverse.

3. Press the start key. The interrupt print mode is entered and a list is output.

When A4/11" x 8

1/2

" paper is available, a report of this size is output. If not, specify the paper feed loca-

tion.
When output is complete, the screen for selecting an item is displayed.

Completion

Press the stop/clear key at the screen for selecting an item. The screen for selecting a maintenance item No.
is displayed.

U001

Exiting the maintenance mode 
Description

Exits the maintenance mode and returns to the normal copy mode. 

Purpose

To exit the maintenance mode.

Method

Press the start key. The normal copy mode is entered.

U002

Setting the factory default data
Description

Restores the machine conditions to the factory default settings. 

Purpose

To move the mirror frame of the scanner to the position for transport (position in which the 
frame can be fixed).

Method

1. Press the start key. The screen for executing is displayed.
2. Select the EXECUTE using the up/down cursor keys. It is displayed in reverse.
3. Press the start key.

The mirror frame of the scanner returns to the position for transport.

Completion

The power switch turns off.

Display

Output list

MAINTENANCE

List of the current settings of the maintenance modes

JAM

List of the paper jam occurrences

SERVICE CALL

List of the service call occurrences

Содержание KM-2550



























































































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды