manualshive.com logo in svg

Kyocera KM-2550, Руководство по обслуживанию, Страница: 120 / 282

Поделиться
Скачать
Kyocera KM-2550 Скачать руководство пользователя страница 120

2FT-1

1-4-53

U942

Adjusting the DP amount of slack in the original 
Description

Adjusts the DP amount of slack in the original.

Purpose

To run this mode if original jams or Z folds occur when copying from the DP.

Method

Press the start key. The screen for setting is displayed.

Setting

1. Select the item to be set using the up/down cursor keys. The selected item is displayed in reverse.
2. Change the setting using the left/right cursor keys.

Increasing the setting, the larger the amount of slack; decreasing the setting, the smaller the amount of 
slack. 

3. Press the start key. The value is set. 

Interrupt copy mode

While this maintenance item is being performed, copying from an original can be made in interrupt copy
mode.

1. Press the interrupt key. The machine enters the interrupt copy mode.
2. Set the original and press the strat key.

To return to the screen for setting, press the interrupt key. 

Completion

Press the stop/clear key at the screen for setting. The screen for selecting a maintenance item No. is dis-
played.

U984

Checking the developing unit number
Description

Displays the developing unit number.

Purpose

To check the developing unit number.

Method

Press the start key. The developing unit number is displayed.

Completion

Press the stop/clear key. The screen for selecting a maintenance item No. is displayed.

U985

Displaying the developing unit history
Description

Displays the past record of machine number and the developing unit counter.

Purpose

To check the count value of machine number and the developing unit counter.

Method

1. Press the start key. The count value of machine number and the developing unit counter is displayed.
2. Change the screen using the left/right cursor keys. Past record of 5 cases is displayed.

Completion

Press the stop/clear key. The screen for selecting a maintenance item No. is displayed.

Maintenance

item No.

Description

Display

Description

Setting range

Initial setting

CONVEY

Original conveying motor (OCM)

-10 to +20

0

FEED

Original feed motor (OFM)

-10 to +20

0

Содержание KM-2550



























































































































































































































































































Отзывы:

Нет отзывов