manualshive.com logo in svg

Kyocera FS-C1020MFP+, Руководство по эксплуатации

Поделиться
Скачать
Kyocera FS-C1020MFP+ Скачать руководство пользователя страница 418

11. Appendix

Functions and Network Settings Available in

an IPv6 Environment

The functions and network settings of this machine that are available in an IPv6 environment differ from
those available in an IPv4 environment. Make sure the functions you use are supported in an IPv6
environment, and then configure the necessary network settings.

• For details about specifying the IPv6 settings, see p.275 "Network Settings" or p.320 "Configuring

the Network Settings".

Available Functions

Print via FTP

Prints documents via FTP using the EPRT and EPSV commands. Windows Vista/7 and an FTP
application that supports IPv6 are required to use these commands.

Printer

Prints documents using the printer driver.

Scan to FTP

Delivers files that have been scanned using the control panel to an FTP server.

Scan to E-mail

Sends files scanned using the control panel via e-mail.

Scan to Folder

Sends files scanned using the control panel to a shared folder on a computer on the network.
This function is not available on Mac OS X.

Network TWAIN Server

Controls the scanning function from a computer on the network, and delivers scanned data to the
computer directly. This function is available only to computers that have a TWAIN-supporting
application. The IP address of the multi-cast group supported by IPv6 is ff12::fb88:1.

Bonjour

Allows the machine to communicate with Bonjour protocol-supported computers on the network.
The IP address of the multi-cast group supported by IPv6 is ff02::fb.

LAN-Fax

Sends a document created in an application as a fax and without printing it.

417

Содержание FS-C1020MFP+





























































































































































































































































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды