Kyocera Mita KM-4530, Руководство по обслуживанию

Страница: 99 / 384

Maintenance
Description
item No.
2BC/D-1
1-4-34
U126 Setting effective potential correction
Description
Sets the correction interval and the correction target value for effective potential correction.
Purpose
To run when replacing the drum or when a density failure which may be caused mainly by the drum occurs.
Method
Press the start key. The screen for selecting an item is displayed.
Setting
1. Select the item to change the setting.
2. Use the numeric keys to change the setting value.
Display Description Setting range Initial setting
START (M) Drum drive time for starting correction 0 to 600000 17000
INTERVAL (M) Correction interval for effective 0 to 600000 1000
potential correction
TARGET Effective correction target value 0 to 999 550
RUN To run the test operation – –
3. Press the start key. The value is set.
Test operation
1. Select RUN and start test operation.
* After correction is complete, each data will be displayed.
Display Description
VO A Dark potential measurement A acquired data
VR A Light potential measurement A acquired data
VO B Dark potential measurement B acquired data
VR B Light potential measurement B acquired data
VO TARGET Target dark potential calculation result
DB CAL Developing bias calculation result
Completion
To exit this maintenance item without changing the current value, press the stop/clear key. The screen for
selecting a maintenance item No. is displayed.
1-4-33-1