Kyocera Mita KM-4530, Руководство по обслуживанию

Страница: 159 / 384

2BC/D
1-5-16
Problem Causes/check procedures Corrective measures
(18)
A paper jam in the
feedshift section is
indicated during
copying (jam in
feedshift section).
Jam code 52/53
(19)
A paper jam in the
duplex section is
indicated during
copying (jam in du-
plex tray section).
Jam code 60
(20)
A paper jam in the
duplex section is
indicated during
copying (jam in du-
plex feedshift sec-
tion).
Jam code 61
(21)
A paper jam in the
duplex section is
indicated during
copying (jam in du-
plex feedshift sec-
tion).
Jam code 62
Electrical problem with the
feedshift solenoid.
Deformed lower feedshift
guide.
Check if the left and right
feedshift rollers contact
each other.
Broken duplex feedshift
switch actuator.
Defective duplex feedshift
switch.
Check if the duplex pres-
sure release solenoid mal-
functions.
Electrical problem with the
duplex pressure release
solenoid.
Check if the duplex eject
switching solenoid mal-
functions.
Electrical problem with the
duplex eject switching so-
lenoid.
Defective face down eject
switch.
Broken duplex paper con-
veying switch 1 actuator.
Defective duplex paper
conveying switch 1.
Defective duplex feedshift
switch.
Check (see page 1-5-47).
Repair or replace if necessary.
Check visually and remedy if necessary.
Check visually and replace the duplex feedshift switch if its ac-
tuator is broken.
Run maintenance item U031 and turn the duplex feedshift switch
on and off manually. Replace the duplex feedshift switch if indi-
cation of the corresponding switch on the touch panel is not dis-
played in reverse.
Run maintenance item U033 and select the duplex pressure re-
lease solenoid on the touch panel to be turned on and off. Check
the status and remedy if necessary.
Check (see page 1-5-47).
Check and repair if necessary.
Check (see page 1-5-47).
Run maintenance item U031 and turn the face down eject switch
on and off manually. Replace the face down eject switch if indi-
cation of the corresponding switch on the touch panel is not dis-
played in reverse.
Check visually and replace duplex paper conveying switch 1 if
its actuator is broken.
Run maintenance item U031 and turn duplex paper conveying
switch 1 on and off manually. Replace duplex paper conveying
switch 1 if indication of the corresponding switch on the touch
panel is not displayed in reverse.
Run maintenance item U031 and turn the duplex feedshift switch
on and off manually. Replace the duplex feedshift switch if indi-
cation of the corresponding switch on the touch panel is not dis-
played in reverse.