This document is the property of KYMATI GmbH and must not be copied or disclosed without its written authorisation.
- KYMATI GmbH – 2021
KY.MAN.0105 (6.0)
KY-LOC 1D.02.01 User Manual
Doc.- No.: KY.MAN.0105
Version:
6.0
Date:
14.12.2021
Page:
78 of 83
Information LEDs (6-
9) are blinking and not
rotating
Device is in Bootloader Mode but will switch to normal mode soon
Information LEDs (6-
9) are blinking and
rotating
Trying to synchronize
Constant Illumination
of all Information
LEDs
Radar provides range measurements, i.e. radars are synchronized
In future these LEDs may be used to support the installation.
11.2
Plug does not fit
Only use connectors specified by KYMATI.
Do not wear gloves when applying the connectors. Take care of the index
position and do not apply unnecessary force.
Problem: One of the plugs does not fit into the connector.
Solution:
Make sure, that you have the correct connector and that you attach it at the correct
plug.
Make sure, that no pins are bent.
The plugs only fit at one position. The plugs have an index notch that indicates the
correct position. The connector must be carefully rotated, until it suits. Afterwards it can
be fastened with the screw cap.
