This document is the property of KYMATI GmbH and must not be copied or disclosed without its written authorisation.
- KYMATI GmbH – 2021
KY.MAN.0105 (6.0)
KY-LOC 1D.02.01 User Manual
Doc.- No.: KY.MAN.0105
Version:
6.0
Date:
14.12.2021
Page:
76 of 83
10
Maintenance and Repair
Do not open the units. In case it is opened, the warranty has expired.
All Units are maintenance free. In case of any problem with one or more devices, check first
chapter 11. If the problem remains the unit might be damaged. Under any circumstances the
units shall not be opened, and repair must not be attempted by the customer.
10.1
Replacement of Equipment
The following points must be considered if a device needs to be replaced:
The device should be mounted in the same place as the old ones to achieve the same
results
The new device should be configured with the same settings as the old device. This
can be done by uploading the configuration file of the old device. User should ensure
that these files are accessible in case of a replacement. Please refer to chapter 6 for
more information
The steps described in chapter 6 should be performed especially the zero calibration
is necessary to get the same results out of the device as before
10.2
Cleaning and Painting
External pollution can be removed with a rag and water. Do not use detergents, solvents, or
other chemicals. Painting especially of the front cover is not allowed.
10.3
Connectors
The electrical connectors are limited to 100 mating cycles.
