This document is the property of KYMATI GmbH and must not be copied or disclosed without its written authorisation.
- KYMATI GmbH – 2021
KY.MAN.0105 (6.0)
KY-LOC 1D.02.01 User Manual
Doc.- No.: KY.MAN.0105
Version:
6.0
Date:
14.12.2021
Page:
65 of 83
Figure 51: Status page, device successfully connected
9.5
Configuration Page
The configuration page consists of three different subpages. The first two subpages are similar;
however, they really depend on which device is connected. These two subpages will be
described in the next paragraph:
Device Configuration:
For each connected device, the user is allowed to:
o
Retrieve Data from the sensor: The device is requested to send its latest
configuration to the local machine.
o
Upload Configuration to the sensor: The user is allowed to choose a TOML file
created using the sensor wizard (see section 9.3) and upload it to the device. A
master and slave are usually created using the sensor wizard, so the
corresponding configuration shall be used for the radar unit attached.
o
Download the configuration from the sensor: The user may store the latest
configuration running on the radar device. The user will be asked to choose a
folder location and a new TOML file will be created.
It is highly recommended to download the final configuration of the device and
store it. This will help for example in a case were a device need to be
exchanged.
