Adjusting the plow
37
Trash board [+]
The trash board should be placed with the front edge close to the
mouldboard, the rear edge should be adjusted according to the plow
-
ing depth.
There are two adjusting holes in the bracket for the trash board, one
for deep plowing and one for shallower plowing (A). In addition, there
are two grooves in the bracket for fine adjustment (B).
T
IP
!
When commissioning the new plow, it is a good idea to adjust the trash
board in the upper position to strip the paint from the plow bodies when
plowing.
T
IP
!
It may be a good idea to adjust the height of the trash board when
changing the working width.
The trash board is set from the front. It is important that the trash board
is fitted with the front edge completely lowered against the mould
-
board to prevent plant waste or similar from becoming caught up.
B
A