Possible modifications
50
Change the release force
setting
The release setting’s release force is correct when the beams do not
become loose during plowing unless they strike an object.
You can change the release force of the automatic beam by
•
Adding or removing spring leaf no. 5
•
With a double set of springs
Carry out the following
Release the spring tension (see page 40)
Change the configurations of the auto-reset beam's spring.
Reapply the spring pressure (see page 40)
Type of springs
Release force*
kN (Ft lbs)
Standard
7.0 (5163)
St 1 leaf no. 5
8.0 (5900)
St 2 leaf no. 5 (for HD spring)
9.0 (6638)
St 3 leaf no. 5
10.0 (7376)
St 5 leaf no. 5
12.0 (8851)
Double (2 x standard)
14.0 (10326)
These values apply for low beams (clearance of 70 cm (28 inches)
Standard
Heavy Duty
Leaf F
No. 1
No. 2
No. 3
No. 4
Leaf F
No. 1
No. 2
No. 3
No. 4
No. 5
No. 4