Kurabo ADS Biotec QuickGene-Mini8L, Руководство по эксплуатации

Страница: 51 / 78

19
QuickGene-Mini8L Operation Manual
2 Operation
(4) Rotate the rotary switch toward the front side to
lower the Pressure Heads.
Important
：
Use both hands to rotate the rotary switch.
Rotate down to here.
(5) The lamp (LED) blinks and pressurized air is put into
the Cartridges row by row.
Note
：
·
When the solution in each Cartridge is
discharged completely before pressure
application automatically stops, return the rotary
switch to the original position to terminate
pressure application (Refer to step (7)).
·
Pressure application automatically stops in
about 70 seconds. Pressuring time can be
changed through the Pressure Mode Switch
(Refer to p.7).
(6) Make sure that the lysate does not remain in the
Cartridges.
Important
：
Make sure that no liquid remains in the Cartridges.
Before pressurizing
After pressurizing
Note
：
·
If any solution remains in the Cartridges even
after about 70 seconds has elapsed, return the
rotary switch to the original position (Lamp
(LED): ON) and then rotate it toward the front
side (Lamp (LED): Blink) to put pressurized air
into the Cartridges again.
·
If the rotary switch is returned swiftly to the
original position, it may result in the splashing or
solutions. Accordingly, rotate the rotary switch
slowly.
2