Kurabo ADS Biotec QuickGene-Mini8L, Руководство по эксплуатации

Страница: 40 / 78

10
QuickGene-Mini8L Operation Manual
1 Setting Up
1.5 Basic Functions
The following describes the main components of QuickGene-Mini8L.
1
Component Function
Main Unit
Rotary Switch
Start/stop putting pressurized air into Cartridges by operating the
Rotary Switch. Pressure application automatically stops in about
one minute. (Pressure value can be changed using Pressure
Control Switch. )
Operating state is indicated by the lamp (LED). When the power is
turned on, the lamp (LED) lights. During pressure application, the
lamp (LED) blinks.
The main unit contains a pump for pressurizing air, a sensor for
detecting start/stop of pressure application, and a circuit for
controlling the duration of pressure application.
Pressure Unit
Put pressurized air into the Cartridges through the pressure heads.
When the rotary switch is turned on, the pressure heads move
down to the Pressure Seal Plate to put pressurized air into
Cartridges.
Holder Unit
The holder unit is comprised of the Cartridge Holder, Tube Holder
and 2 pcs of Pressure Seal Plate.
Lysate/Wash Buffer/Elution Buffer put in a Cartridge passes
through the filter in the Cartridge by pressurized air and filtered
solution drops into the Waste Tube or 1.5 ml microtubes.
Note: Pressure application of lysate and wash, and that of
elution operation are switched by moving the position
of the Cartridge Holder manually.