KUHN MAXIMA 2 M Скачать руководство пользователя страница 41

Страница: 41 / 220

Putting into service

Precision Seed Drills

MAXIMA 2 M

Tyres

If compatible with the seed drill configuration, we

recommended fitting the tractor with dual wheels or
extra-wide wheels in order to reduce the ground
pressure.

Tractor tire pressure

To ensure that tractor can be driven safely and that

machine gives the desired finish, each tyre must be
inflated to the correct pressure for the load supported.

- Slightly lift the machine from the ground.
- Measure the load on each wheel (or the load of one

axle divided by 2) using a weight indicator or a scale.

- Refer to the tyre manufacturer's pressure chart.
- Adjust the tyre pressure to the measured loads.

The tyre pressure must be identical on each side of the

tractor.

Make sure that the seed drill never interferes
with the tractor wheels.

Содержание MAXIMA 2 M





























































































































































































































Результаты поиска

Содержание MAXIMA 2 M

Отзывы:

Похожие инструкции для MAXIMA 2 M

Бренды по названию

Популярные бренды

KUHN MAXIMA 2 M, Руководство оператора

Результаты поиска

Содержание MAXIMA 2 M

Отзывы:

Похожие инструкции для MAXIMA 2 M

Бренды по названию

Популярные бренды