KUHN MAXIMA 2 M, Руководство оператора

Страница: 21 / 220

Safety
Precision Seed Drills
MAXIMA 2 M
19

Precautions for machine use
Before use, check the condition of the fasteners in
accordance with the instructions contained in this
manual.
Keep all persons and animals away from the danger
zone. Check that nobody is within the side marker
operating area on headlands.
Stay a safe distance from the machine when the cutting
tools are in movement.
Never work in reverse.
Stay away from the machine until all moving parts have
come to a complete standstill.
Check the entire machine for any damage before
resuming work.
Never engage the tractor PTO drive when the machine
is in transport position.
If the machine hits an obstacle, disengage the PTO
drive, stop the tractor engine, remove the ignition key
and wait for all moving parts to come to a complete
standstill. Check the entire machine for any damage
before resuming work.

Precautions to take with crop protection
products
Keep crop protection products away from children.
Do not clean outlets, spreaders, tubes or other small
parts by blowing with the mouth. When using crop
protection products, never smoke or eat.
All precautions must be taken to prevent hopper from
overflowing and products from flowing outside the
treatment area.
Booms and tanks are to be drained in all cases over the
areas under cultivation in accordance with regulatory
provisions.
Keep machine control and handling devices clean and
make sure to wash your hands prior to using these
devices.
Rinse and pierce packagings to prevent them from being
reused.
Find out about and comply with the instructions on the
use of crop protection products with regards to their
possible harmfulness for insects and wildlife, especially
for pollinating insects.