KUHN AXERA-M, Руководство оператора

Страница: 23 / 46

23
3.5 Adjustment as per spreading charts (late top dressing / boundary
spreading during late top dressing)
Output point, disc type, mounting height and PTO speed must be adjusted as per the
spreading charts according to the fertilizer used, desired working widths and the type
of spreading operation to be adopted.
Late top dressing
Example.:
Chosen fertilizer type : e.g. KAS
Desired working width: 21 m
Desired application rate: 211 kg/ha
Desired forward speed.: 10 km/h
The spreader must be adjusted to the follow-
ing settings:
Disc type: D4 M VXR
PTO speed: 540 rpm
Mounting height: 0/6
[
cm
]
measured from
top of standing crop.
Output point: 8.5 (left and right)
Metering slide position: 120
Boundary spreading during late top
dressing
Example:
Chosen fertilizer type : e.g. KAS
Desired working width: 21 m
Desired application rate: 211 kg/ha
Desired forward speed.: 10 km/h
The spreader must be adjusted to the follow-
ing settings:
Disc type on left-hand side (viewed in direc-
tion of travel): D4 M VXR
Disc type on right-hand side (viewed in di-
rection of travel): DG 69. Here both vanes
must be set in their normal position (i.e. one
vane in D setting and the other in E).
PTO speed: 540 rpm
Mounting height: 0/6
[
cm
]
measured from
top of standing crop.
Output point: 8.5 (left and right).
With left- or right-hand boundary spreading
the output point can be individually set ac-
cording to working width and fertilizer type
(see spreading charts)..
Metering slide position: 120