KUHN AXERA-M, Руководство оператора

Страница: 31 / 46

31
7. Service
When servicing the spreader in the raised position, make sure that suit-
able chock supports are placed under the frame to support its weight.
Only spare parts that correspond to the technical specification demanded by the im-
plement manufacturer should be used. These specifications are only obtainable with
original spare parts.
Regularly check nuts and bolts for tightness and tighten up where necessary.
Wear parts:
Spreading blades, agitator, outlet
If these parts show perceivable wear and tear, deformations or holes they have to be
replaced, as these can result in irregular spreading patterns.
The life of wear parts depends among other things on the used spreading materials.
7.1 Servicing PTO shafts fitted with a slip clutch (optional equipment)
After a time, especially if the PTO has not been used, the clutch plates will tend to
stick together and will need to be freed. Consult the Walterscheid service manual to
follow correct procedure.
Important: An incorrect functioning slip clutch can cause damage to the gear train
in either the fertilizer spreader or the tractor.
8. Lubrication chart
♦
PTO shaft : lubricate as per Walterscheid instruction book.
♦
Gearbox : change oil every 1000 working hours, or at least every 4 years. The
gearbox is filled with 7.7 litres of oil.
The gearbox can be filled with oil corresponding to standards CLP 460 DIN 51517.
Some of these oils are listed below:
Aral: Degol BG 460
BP: Energol GR-XP 460
Castrol: Alpha SP 460
DEA Falcon CLP 460
Esso: Spartan EP 460
Fina: Giran 460
Mobil: Mobilgear 634
Shell: Omala Öl 460
Total: Carter EP 460
Texaco: Meropa 460
Important: These oils must not be mixed together. Always carry out complete oil changes.