background image

 38

 

Example

: the specific weight of Thomaspotash = 1.35kg/l.  As the maximum pay-

load of the AXERA M Fertilizer Spreader is 3500kg, a total capacity of 2592,6 litres 
of Thomaspotash should not be exceeded. 
 

 

Max. capacity= 

 

max. payload 

spez. Weight of fertilizer 

 

e.g: 

 

3500 kg 

1,35 kg/l 

 

 

2592,6 Litres 
 

 

 
 

13.2  Hopper cover (AP 10 / APE 10) 

The hopper cover can be opened from the front or the back. Depending on extension 
set used, a hopper cover extension (APE 10) is obligatory to fully cover the hopper. 
Fitting instructions are supplied with each hopper cover / hopper cover extension. 

 
 

13.3  Hopper cover (AP 11) 

The hopper cover can be opened from the front or back. The back section is longer to 
allow safer sealing with 3-sided hopper extension sets. Fitting instructions are sup-
plied with each hopper extension. 

 
 

13.4  Parking stand / support rollers  

When the spreader is empty it can be easily parked using the support stand or support 
rollers. By using the support rollers the empty spreader can be manoeuvred without 
tractor help into its parking place. Support rollers and parking stand are supplied to-
gether with fitting instructions. 

 
 

13.5 Lighting set 

BLW 11

 (c/w warning shield and reflectors for 

rear

 visual 

se-

curity) 

The unit must be equipped with a light and warning set for rear visual security which 
conforms to the rules and traffic regulations of the country concerned.  The lighting 
set is supplied together with fitting instructions. 

 
 

13.6 Lighting set 

BLW 12

 (c/w warning shield and and positioning lights for 

 

frontal 

visual security) 

The unit must be equipped with a light and warning set for frontal visual security 
which conforms to the rules and traffic regulations of the country concerned.  The 
lighting set is supplied together with fitting instructions. 

 
 

Содержание AXERA-M















































Отзывы: