KUHN AXERA-M, Руководство оператора

Страница: 5 / 46

5
Accident prevention and safety issues
Most accidents happen because someone ignores the most elementary safety rules
during operation, maintenance or transport. It is vital that all persons coming in con-
tact with the machine - the purchaser himself/herself, a member of his/her family, an
employee, a bystander - strictly obeys the following main safety rules. Other safety
instructions are to be found on the decals placed in various prominent positions on
the machine.
♦
Observe all safety notes contained in this Operators Manual and all current statu-
tory safety and accident prevention regulations!
♦
Before every operation, check nuts and bolts and other fixings for tightness, espe-
cially those of the spreading discs and spreading vanes. If necessary, tighten to re-
commended torque settings.
♦
Before using the machine, operators must familiarize themselves with all parts of
the equipment and the function of all controls and adjustments. Finding out dur-
ing operation may be too late.
♦
Before every operation, ensure that the tractor spreader combination complies with
all relevant road traffic, as well as health and safety regulations.
♦
When filling the hopper, lower the spreader to the ground and switch off the trac-
tor engine. Remove ignition key before leaving the tractor cab. Make sure shutter
controls are closed.
♦
Before adjusting or undertaking other work such as cleaning, lubricating or carry-
ing out operations on the spreader, disengage the PTO, switch off the tractor en-
gine, wait until all moving parts have come to a stop and remove the ignition key.
During control or repair work, make sure no one can switch on the unit by mis-
take.
DANGER = Power driven parts !
Never put hands, feet or clothing anywhere near mov-
ing parts. Never reach into the hopper - moving parts !
Always avoid wearing loose clothing or clothing with
loose parts that are liable to come into contact with
moving parts.
♦
Keep the hopper free of any foreign bodies.
♦
Before starting the spreader, make sure that nobody is within the danger area a-
round the machine. Make sure you have a good view all round and keep a special
watch out for children!
♦
When outside the area of work the spreading mechanism must be disengaged.
♦
Only start up the spreader when all safety devices and guards have been properly
fitted.