Instructions for work
Silo unloader - Straw spreader - Mixer - Distributor
ATHENOR 6070
61
Before starting the beater bar, make sure the conveyor
speed is set to position 0 to prevent a load being fed into
the blower.
The product flow rate is adjusted by:
• Changing the tractor engine speed: this regulates
the hydraulic flow and the PTO rotation speed.
• The conveyor speed.
Never attempt to clear the product by hand or
with a tool (fork, etc.) while the machine is
running.
If the blower or bale separator is blocked, use
the hook (1) inside the left hand machine
casing, to remove any product which is stuck
in the distribution chute or bale separator.
Afterwards, use a lever to turn the blower
freely.
When the machine is loaded, we strongly
advise you to not leave the conveyor running
in reverse longer than is necessary.
Содержание ATHENOR 6070
