manualshive.com logo in svg

KUHN ALTERNA 500R, Руководство по сборке и эксплуатации

Поделиться
Скачать
KUHN ALTERNA 500R Скачать руководство пользователя страница 39

- 37 -

STORAGE

I - AT THE END OF THE SEASON

1. Thoroughly clean the mower conditioner.

2. Check the condition of the machine.  List the replacement parts that will be needed.  Order replacement parts

early from your Kuhn dealer so that they may be fitted during the slack period.

3. Repaint the rusted parts of the machine and all areas were the paint has worn off.

4. Drain oil from all gearcases and cutterbars and refill with the precribed quantity of the correct grade oil.  Apply

grease to all fittings as described in the lubrication section.

5. Store the machine in a dry place.

6. Park the machine in transport position.  Oil the rods of all cylinders that are not retracted (ie. 1 central pivot

cylinder; 2 transport wheel cylinders).

7. Slacken the V-belts and check their condition.

II - AT THE BEGINNING OF THE SEASON

1. Attach the machine to the tractor and place it on level ground in the working position.

2. Check all oil levels and grease the machine as described in the lubrication section.

3. Retension the V-belts (see adjustments section).  Make sure all guards are firmly secured in place and in good

working order.

4. Decompress the torque limiter’s springs and allow the clutch to slip.  Then readjust the torque limiter as

described in the corresponding section.

5. Check tire inflation for the correct pressure of 2.7 bar / 40 psi.

6. Inspect all knives and the hardware used to hold them in place (see the corresponding section).

7. Check that all nuts and bolts are sufficiently tightened.

8. READ THIS OPERATORS MANUAL ONE MORE TIME.

Содержание ALTERNA 500R





















































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды