manualshive.com logo in svg

KUHN ALTERNA 500R, Руководство по сборке и эксплуатации

Поделиться
Скачать
KUHN ALTERNA 500R Скачать руководство пользователя страница 21

- 19 -

ADJUSTMENTS

Before carrying out any operation such as maintenance or adjustment on the
machine, stop the tractor engine, remove ignition key and wait for rotating discs and
rotor to stop before leaving the tractor.

1) Friction slip clutch

The friction slip clutch (code no. 557 901 00 for
ALTERNA 500 / 500 R and 522 835 00 for ALTERNA
400 / 400 R) is fitted to the rear of the primary PTO
shaft

Springs are factory set to a length of 35 mm for
ALTERNA 500 / 500 R  and  33 mm for ALTERNA
400 / 400 R which enables torques up to 140 daNm
(1000 ft.lbs) for ALTERNA 500 / 500 R and 125
daNm (922,5 ft.lbs) for ALTERNA 400 / 400 R to be
transmitted. This setting is applicable to average
operating conditions.

Check if this setting is suitable for the given condi-
tions during the first few hours of use :

- If the spring pressure is too light, plates slip

continuously or intermittently at frequent intervals,
resulting in overheating and rapid wear of the
friction plates.

- Over-pressured or completely coil bound springs

provide no protection to the drive components.

Never fully lock the springs.

2) Access to discs and knives for

service

The front safety curtains can be maintained in the
raised position by means of lever (1) to gain access
to the cutterbar for service.

After having carried out service
work, fold down the guards and
connect curtains together using
the straps provided.

Содержание ALTERNA 500R





















































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды