KUHN ALTERNA 500R, Руководство по сборке и эксплуатации

Страница: 18 / 52

- 16 -
4) Operate DE2 to position machine to the left or the
right side of the tractor.
5) Move slowly forward until the work wheels are
aligned in the same direction as the tractor wheels.
6) Operate DE1 to fully retract the work wheel
cylinders and lower the cutterbar onto the ground.
7) With the tractor’s hydraulic 3-point lift, position
the Girodyne head in order to set the hitch pins at
a distance of 700 mm/ 2’4" from the ground.
Hook one end of the check chains (R) to the hitch
brackets (C) by means of the shackles (S) and
attach the other side to the tractor’s top link yoke
by means of the top link hitch pin (A).
Lower the 3-point lift. The attachment is correct
when the underside face (I) of the tongue is
approximately horizontal and the lower hitch pins
are at a distance (H) of around 650 mm/2’2"
from the ground when the check chains (R ) are
taut.
The cutterbar must rest on the
ground before engaging the PTO.
Never mow in stony or rocky
grounds.
TRANSPORT TO WORK POSITION