manualshive.com logo in svg

KUHN ALTERNA 500R, Руководство по сборке и эксплуатации

Поделиться
Скачать
KUHN ALTERNA 500R Скачать руководство пользователя страница 15

- 13 -

ATTACHMENT TO THE TRACTOR

Make sure the PTO shaft length is correct for the
tractor being used.

1) Activate the tractor hydraulics to line up the

tractor PTO and the machine input shaft in the
horizontal plane.

2) Slide the other half PTO shaft (without torque

limiter) onto the tractor PTO and align both half
PTO shafts side by side. If there is excessive
overlap, mark and shorten the hatched portions
of the transmission tube keeping a safety clear-
ance of 10 mm (0.5") between the ends of the
tubes and the yokes.

- Bevel and debur transmission

tubes. Remove all steel chips and
filings. Grease the inside of the
outer transmission tube.

- Shorten the guard tubes by the

same length as the transmission
tubes, as shown in the opposite
drawing.

- For your safety, there must be a

minimum tube overlap of 180 mm
(7") when the PTO shaft is in its
maximum extended position.

- Make sure the PTO shaft is con-

nected to the 1000 min

-1

 tractor

PTO.

3) All machine operations are controlled by the

tractor’s two double acting directional valves.
a) Connect hydraulic hoses (1) to the outlets of

the first directional valve, which will be re-
ferred to as DE1. Activating DE1 raises and
lowers the cutterbar.

b) Connect hydraulic hoses (2) to the outlets of

the second directional valve, which will be
referred to as DE2.

c) Carefully fit and cable the pre-cabled female

socket (5) (see electric lay-out, connections
and schematic).

d) Plug terminal (4) into the installed female

socket.

-

Activating DE2 on its own sets the machine to
the right or to the left of the tractor.

-

Activating DE2 and simultaneously pressing
thumb switch (3) raises and lowers transport
wheels.

Содержание ALTERNA 500R





















































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды