KUHN ALTERNA 500R Скачать руководство пользователя страница 33

Страница: 33 / 52

- 31 -

LUBRICATION

IMPORTANT :

Imperatively change oil in :
- cutterbars
- central gearbox
- Gyrodine gearbox
after the first 10 hours of use SAE 80 W EP (GL4).
Thereafter, oil must be changed after every 200 hours of work, or at least once per year.

I) Draining and refilling the 2 cutterbars

- Before draining oil, operate the cutterbar for at least 10 minutes so that oil warms up.

a) Before starting the machine make sure that :

- all guards, shields and curtains are in place
- everyone is kept away from the machine

b) Do not leave the tractor seat while the machine is running.

- Tilt the cutterbar. To do this, raise the platform, place a 300 mm (12") high wedge under one end skid and

a 150 (6") high wedge under the other end skid, then lower the platform onto the wedges.

- Remove end plate (1) from the lower end of the cutterbar and collect oil in a catchment tank of at least

3 1/2 pint capacity.

- Allow oil to drain completely. Wait for dripping to stop.

- Reinstall end plate (1) and the gasket. Tighten the three allen screws to 9.5 daNm (70 ft.lbs).

- To drain the second cutterbar, raise the platform, change over the wedges and proceed in the same

way.

- Refill each cutterbar with the correct quantity of SAE 80 W EP (GL4) oil as indicated below :

ALTERNA 400 : 1.4 litre / 3 US pints / 2.5 Imp. pints per cutterbar.
ALTERNA 500 : 1.7 litre / 3.5 US pints / 3 Imp. pints per cutterbar.

- Refill through the fill plugs (2) located at each cutterbar end.

Содержание ALTERNA 500R





















































Результаты поиска

Содержание ALTERNA 500R

Отзывы:

Бренды по названию

Популярные бренды

KUHN ALTERNA 500R, Руководство по сборке и эксплуатации

Результаты поиска

Содержание ALTERNA 500R

Отзывы:

Бренды по названию

Популярные бренды