manualshive.com logo in svg

KUHN ALTERNA 500R, Руководство по сборке и эксплуатации

Поделиться
Скачать
KUHN ALTERNA 500R Скачать руководство пользователя страница 19

- 17 -

Changing the machine from the work
position to the road transport position

It is advisable to first position machine to the right-hand
side of the tractor by shifting DE2.

1) Raise tractor lower links completely.

2) Activate DE1 to fully extend work wheel cylinders.

3) Press thumb switch and at the same time operate

DE2 to lower the transport wheels.

Note : Both transport wheel cylinders may not oper-

ate at the same speed. To assure that both
cylinders are fully extended, keep the valve
shifted for a few seconds after the front
transport wheel has closed up against its
stop. Then return DE2 to neutral.

4) Shift DE1 in the opposite direction to lower the

unit onto the transport wheels.

When operating on sloping ter-
rain and to avoid that the ma-
chine goes off course, keep the
work wheels as near to the ground
as possible.

WORK TO TRANSPORT POSITION

While changing the machine from
the work position ot the road trans-
port position:
- Stop tractor P.T.O. and wait for

rotating discs and rotor to stop.

- Always ensure that nobody is

near the machine pivoting zone
(hatched area on the drawing
opposite).

Содержание ALTERNA 500R





















































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды