KUHN ALTERNA 500R, Руководство по сборке и эксплуатации

Страница: 17 / 52

- 15 -
Always ensure that nobody is near
t h e m a c h i n e p i v o t i n g z o n e
(hatched area on the drawing
opposite) before and while chang-
ing the machine from the road
transport position to the work po-
sition.
Changing the machine from the road
t r a n s p o r t p o s i t i o n t o t h e w o r k
position.
Before starting this switch over, double check that
the tractor lower links are completely raised.
When operating on sloping ter-
rain and to avoid that the ma-
chine goes off course, activate
DE1 to extend the cylinders for
the work wheels so that they stay
as near to the ground as possible.
1) Activate DE2 until machine and drawbar are at a
90° angle to each other.
2) Activate DE1 to fully extend the cylinders for the
work wheels.
3) Press thumb switch and at the same time shift
DE2 in the same direction to raise the transport
wheels.
TRANSPORT TO WORK POSITION